Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working after a few days, it could be due to a dead battery in the coin, water damage and receiver module issues or a damaged electronic chip. Fortunately, these issues are easy to fix and you'll have your vehicle back to normal in no time!
Car keys can also be damaged due to the fact that the blade on the key gets worn. This is an easy fix if you visit your local Car Key Man Auto Locksmith and let them install a new key blade for you.
Battery
The battery for the key fob in your Peugeot 308 can sometimes die or become weak enough to send an effective signal to the car. This could cause the key fob's function to cease and prevent you from opening and locking the doors, or even starting your engine. You'll need a new battery on your key fob to correct this.
You can buy a brand new battery at an auto parts store, or at your local hardware store. Make sure that the battery is brand new and has not stored on the shelf too long. A new battery has more capacity and can transmit a stronger signal to your vehicle.
After replacing the battery If you have a new battery, try unlocking and locking the doors of your Peugeot with the key fob. If the doors won't unlock it's possible that the receiver module inside the car is the culprit. The local Peugeot dealer can reprogramme the receiver module.
It's possible that the chip inside your key fob is damaged. It's possible to harm your key fob if you drop it on the ground or expose it to water. The rubber seals that shield the chip from moisture might become worn down over time particularly if your key fob is exposed to water for long durations, like submerging it in the ocean at the beach. To prevent this from happening, it's essential to keep your key fob away from water and never let it come in contact with water.
Water Damage
If your key fob becomes wet regardless of whether you tossed it into the pool or threw it into a puddle, don't think that it's an accident. Although the key fob is equipped with rubber seals that protect it from water, long-term exposure to water can cause damage to the electronic chip. Since water is such an excellent conductor and conductor, any water that gets inside the key fob will result in a series of short circuits that eventually ruin the chip. After taking the battery out, clean the contacts with isopropyl Alcohol and dry it completely before putting it back into.
peugeot keys G28CarKeys may not start because of an unresponsive battery. Jumper cables can be a great way to restart the engine when you have an additional vehicle. If the battery is the problem then it must be replaced.
Another possible cause is a defective receiver inside the vehicle, which can stop it from receiving a signal from the key fob. The key fob might be damaged, or there could be a problem with the antenna, wiring, or the key fob itself. If you're using a new key fob, it might need to be programmed for the vehicle. If you are unable to fix the problem, contact an expert technician. A technician trained in the field will be able detect the issue quickly and resolve it quickly.
Radio Interference
Signs like key fobs not being recognized or having a limited range usually indicate that there is an interference in the system. This is either radiated or conducted, with the latter resultant from power supply cables and speakers wiring that are too close to electrical components. In general, rerouting cables or moving them away from these components can solve the problem.
It's unlikely that someone is listening in on your key fob signals to take your car away, but it's possible that your signal has been masked by radio frequency interference. Fortunately, this issue is simple to repair.
If your key fob is not being recognized by the system, try replacing the battery. Also, ensure that the battery is the proper size and type. Batteries that are not the right size could damage your battery.
Some alarm systems that are sold on the market and radar detectors use the same radio frequency as your key fob and they could cause them to interfere with your key signals. Do not connect these devices to your key fob.
Pairing Issues
The remote keyless entry system of the car is equipped with a receiver that receives radio signals from the key fob. It will not be possible to start your vehicle if this receiver is not functioning properly, even if your key fob works and can be reprogrammed. The issue can be caused by a number of things, including a dead coin battery and water damage. The receiver could also be malfunctioning due to an internal or software glitch or damage to the key itself.
One of the main reasons for why your Peugeot 308 key fob doesn't work is that the battery inside has gone out of service. This battery can be replaced, but you must make sure that it is the appropriate battery for the key fob. Using an incorrect battery could result in further problems with the key fob, therefore it is recommended to use the original or an equivalent replacement in size, voltage, and specifications.
Another reason that the reason your Peugeot 308 key fob might not work is because it is paired with a different car. This could happen if you have given your key fob to a friend or it has been used to unlock and start other vehicles. This issue can be solved by reprogramming the key fob with an OBDII scan. This tool will request information about your vehicle, such as its VIN or engine type. It is vital to enter the correct information.
